The Catalog

Parts order form can be found at the bottom of the page or you may reach out for content here.

Black circular metal piece with a rectangular cut-out on a white scratched surface.

Lower A-Frame Shock Plate

HC-6250

$12

A metal circular mechanical part with two bolt holes on a white surface.

Helix

HC-1425-65

$30

Metal object with geometric shapes on a white surface, outdoors.

Mittered Tube

HC-5410842-LM

HC-5410842-RM

4” x 2” x 1/8”

$80

A black rubber or plastic automotive part with a curved shape and an 'R' marked on it, placed on a white surface outdoors.

Mandrel Bent tube

HC-5410842-LB

HC-5410842-RB

4” x 2” x 1/8”

$98

Metal stand with cutouts and the word "MACHINE" cut into one side, placed on a white surface with a small metal piece next to it.

Trailing Arm Bracket

HC-377-25

$80

Slug - $14 each

Trailing arm Bracket -Slotted

HC-378-S

$80

Trailing arm bracket with hole

HC- 379-H

$60

A metal device with the inscription 'HAMM W 5',

trailing arm braCket - serrated adjustable

HC-380-V

$195

A metal car part labeled 'HAMS CHASSIS' on a white surface, with a dark background.

Upper trailing arm slug

HC-1911-S

$85

Metal automotive component labeled 'HAMMS CHASSIS' placed on a white surface with a brown background.

Upper trailing arm with holes

HC-1911

$70

A metal clamp with a threaded bolt on a white surface.

Upper Trailing arm - serrated adjustable

HC-1911-SA

$140

Metal mechanical part with bolts, nuts, and the text 'HASMUS' cut into the metal, laid on a white surface.

9” Ford Upper third link bracket offset to rear

HC-369

KIT $140

A metal tool shaped like a handgun trigger with two gold bolts and a hole, placed on a textured, dark surface.

9” Ford Upper third Link bracket - Center

HC-361

KIT $85

Automotive chassis parts including a long, cylindrical metal arm and a matching shorter piece, labeled 'HAMM'S CHASSIS,' placed on a white surface.

Lower Trailing arm 19 1/4” Or adjustable

19 1/4” HC-1975-J $185

ADJUSTABLE HC-1925 $95

A metal mechanical component with gear teeth, a bolt, and a mounting plate, placed on a white surface.

Serrated Pan Hard Mount

HC-370

$175

Metal fixture with two adjustable screws, placed on a white surface.

Adjustable A-Arm Mount

HC-371

$110

A flat, rectangular metal tool with two oval cutouts on each end, resting on a white surface.

Slug A-arm mount

HC-372

$42

Steel cross shaft L” ON Center

HC-9

$42

A metal U-shaped piece with bolt connections at each end and a long flat metal bar across the open side, lying on a white surface.

A-Frame from 7” up To 14”

WE BUILD CUSTOM TO ORDER BALL JOINT CUPS FOR 772

HC-814

$180

Two metal hexagonal tubes with threaded ends lying on a white surface.

TIE-rod Aluminum or steel

CONTACT FOR PRICING

Black U-shaped metal pipe with a notch at the top center, placed on a white surface.

A-Frame

CUSTOM TO ORDER

CONTACT FOR PRICING

Pair of metallic automotive suspension control arms with integrated bushings, placed on a white surface.

Center link slug or hole

Slug HC-17255-LM $300

Hole HC-1725-H-LLM $275

Metal latch with a blue handle labeled 'OPEN' and 'SHUT' on a metal plate, mounted on a white surface.

Fuel shut off

HC-373

$135

Two metal slotted bars with U-shaped cutouts on a white surface.

Aluminum a-fram shim

SIZES: 1/16” - 1/8” - 3/16” - 1/4” - 1/2” - 3/4” - 1”

CONTACT FOR PRICING

Metal machine shaft and components on white surface.

Monoball + Spacer

Ball HC-374 $28

Spacer Kit HC-375 $18

A black mechanical part with metal components, connected to a small fitting with a black cap, placed on a white surface.

Custom Spindle - Left Front

CONTACT FOR CUSTOMIZATIONS AND PRICING

A black metal automotive part with a wrapped plastic tube at one end, placed on a white surface with a metallic wall in the background.

SPINDLE - Right Front

CONTACT FOR CUSTOMIZATIONS AND PRICING

Metal mechanical part with a rectangular tube and a small attached block with multiple holes.

R- Side Frame Horn with sway bar hole

HC-1830-H-R

$125

Metal mechanical part with welded joints and drilled holes on a white surface

L-Side Frame horn

HC-1830-H-L

$145

Metal bar with angled ends and mounting brackets on a concrete floor.

Frame saver

HC-54108-EXT

$120

Two metal machining blocks with engraved text, placed on a white surface.

Bell hoosen Mount

CONTACT FOR PRICING

Two metal brackets on a white surface, one is flat with two holes and one elongated oval cutout, the other is a folded bracket with two holes and markings 'HW 15'.

TRANSmountain mount

CONTACT FOR PRICING

Four metal parts on a white surface, two are curved brackets with multiple holes, and two are rectangular metal pieces with one hole and a rectangular cutout.

Motor mounts

HC-54108

$32

Three mechanical parts on a white surface: two black roller bearings and two flat metal brackets with a hole and a cylindrical cutout.

Upper trailing arm kit mount for monobell’s

HC-376

$245

A metal bracket with multiple circular cutouts and the words 'HAMMER 2' visible, lying on the ground next to two rubber mats.

Radiator mount

HC-HW5

$80

Two metallic linear rails with teeth on one side, mounted on rectangular plates with large bolts in the middle, placed on a white surface.

Aluminum rear adjustable shackle

CONTACT FOR CUSTOMIZATION AND PRICING

Metal automotive suspension control arm and a circular mounting plate on a white work surface.

Metal suspension component with welded joints and a separate circular mounting ring.

Lower A-Frame and Spring helix - Right side

Lower A-Frame HC-1425727-10-R $240

Spring Helix HC-1425-65 $30

Lower A-Frame and Spring helix - Left Side

Lower A-Frame HC-1425727-L $240

Spring Helix HC-1425-65 $30

Metalwork project with two welded metal components labeled 'HAMM'S' on a metal worktable, surrounded by workshop tools and equipment.

A metallic exhaust pipe with multiple bends, lying on a concrete floor.

Custom Rear end

Ford 9” Rear End

Starting at $500+

A polished metal set of automotive exhaust headers lying on a concrete floor.

Beyea Custom Header - LEft

Call for customizations and pricing

Metal car part with welded joints placed on a black perforated metal surface.

Beyea Custom Header - Right

Call for customizations and pricing

A metal square tube with attached hanging brackets resting on a concrete floor.

RIGHT LOWER A-FRAME CAMARO

HC- 26116135-RC10

$250

Metal mechanical component with welds, circular openings, and mounted bearings on a perforated metal work surface.

Four Link Cross Member

HC- 5442-RUF

$130

A metal car part with two small gear-like components at each end, laid on a white cloth on a work surface.

LEFT LOWER A-FRAME CAMARO

HC- 26116135-L

$250

A wooden spatula with a label reading "Joe Hamm Pot Stiring Award" attached to the handle.

Camaro Center Link

HC-26125-C

$280

Joe HAMM Pot Stirring OAR

Priceless

Please fill out the order and customization form below. we will be in contact with you to confirm your order.

Payments will be made by invoice.

Shipping fees with apply.

Local pick up available.

Parts Order Form

Stacked metal fabrication parts on a wooden pallet in an industrial workshop.

Name

First Name

Last Name

Phone

(###)

###

####

Email

Shipping or Local Pick-Up?

Delivery fees will be calculated after order verification

Part Request

Please include the part name, part number if stated, and any customizations you need. If you are unsure, please note "Contact for Customizations."

Address

If you will need your part shipped, please include your address.

Address 1

Address 2

City

State/Province

Zip/Postal Code

Country

Follow us on Facebook!